Location:Home > Technical service > Technical knowledgeTechnical knowledge

The comprehensive maintenance of old master machine notes

First, the engine water temperature is high, remove the thermostat, the thermostat seat below the application of small holes plug the plug, to prevent hot water recycling.Second, the gear pump on the side of the vacuum to generate a suction port. The side…

More

142017-04

Hitachi excavator upper structure and the working principle of the main pump and the sensor

Pump system includes main pump (HPV091DW) and pilot pump (HV/ZFS11/16.8L) two kinds. The main pump for variable displacement axial piston type can be bent, the main hydraulic system of hydraulic oil is transported to the mechanical and hydraulic component…

More

142017-04

Engine power shortage "eight see eight check"

Look, smoke checks for wear. Two see carbon deposition check condition. Three, look at the water temperature check cooling. Four look at the gas distribution valve. five look at the cylinder pressure check leak. Six see smoke smoke check. Seven see chaca…

More

142017-04

Excavator running deviation

1. The hydraulic pump is faultyUnder normal circumstances the excavators are used double pump, walking is usually a pump is faulty, the simplest way to judge is: the two high-pressure hydraulic pump tubing on the transfer, if the original slow faster, the…

More

142017-04

Hydraulic system failure and maintenance of excavator

The hydraulic system is mainly composed of hydraulic oil, hydraulic system, hydraulic system, hydraulic system and so on. It has the advantages of compact structure, flexible operation, smooth operation and convenient operation. The hydraulic system is a …

More

142017-04

Engineering machinery maintenance four

Construction machinery plays an important role in the construction of the country, so we should pay attention to the maintenance and maintenance in time. Maintenance is an effective means to restore the performance of construction machinery and prolong it…

More

142017-04

Hydraulic maintenance data for excavator

Excavator common faults and exhaust method: walking motor, two main tubing burst. The motor two main pipe walking hydraulic excavator (A, B) is the main reason often burst speed, double speed valve after the valve failed to return on time, the oil inlet a…

More

142017-04

Troubleshooting of loader cylinder

How to maintain the hydraulic system of system is put into general are before after washing, the washing purpose is to remove residual contaminants in the system, scrap metal, fiber core compounds, etc., in the first two hours of work, even if not comple…

More

142017-04
<12>
WeChat
Visits

Of the 2017 Han Li hydraulic (Chinese) Co. Ltd. all rights reserved..All Rights Reserved.     粤ICP备17057893号-1

BY:idea3600

    在线留言
  • 姓名不能为空
  • 手机号码不能为空
  • 邮箱地址不能为空
  • 内容不能为空
Share
020-82278019

WeChat